The budget banner stand is one of our best selling display roller banner stands.

Whilst these stands are very simple and straight-forward to use, we do have the occasional customer who suffers from a leaning banner stand.

it is usually the case that the support pole is not being inserted into the base of the stand correctly and so we have taken a picture to show exactly how the support pole should be seated.

You will see that the pole of the stand first passes though a circular cut-out on top of the banner stand casing. The pole then passes through a channel (where the pole would normally be stored) and MUST be seated behind the semi-circular cut-out in the banner stand casing.

The fitment of the pole is quite a positive click and so you might have to push firmly on the pole or wiggle it slightly so it clips into place correctly.

If the pole is seated correctly and the feet are extended correctly when the stand is assembled then the stand should stand up with a very slight backwards angle. This is normal and is because the print emerges from the front of the casing and the support pole is in the centre of the casing.

Should you have any problems assembling your banner stand then please let us know and we will be happy to help!